Install Your Spot Shower Head
The ultimate guide to upgrading your shower experience. Follow these simple steps to gain complete control over your power, placement, and hygiene.
Preparation Guide
Ensure you have everything ready for a seamless installation of your Spot shower head.
Adjustable Wrench
Needed to loosen the old shower head and secure the new Spot mount.
Plumber's Tape
Included in the box. Use it to ensure a leak-proof connection on the shower arm.
Clean Surface
Clean the shower arm and glass/tile surfaces to ensure magnetic and suction mounts hold.
Digital Guide
Keep this page open on your phone or tablet for the step-by-step video guide below.
01
Remove Old Hardware
Unscrew your current shower head by turning it counter-clockwise. Use a wrench if it's tight, and clean any old tape from the shower arm threads.
02
Apply Plumber's Tape
Wrap the included plumber's tape 2-3 times clockwise around the threads of the shower arm to ensure a water-tight seal.
03
Attach Magnetic Mount
Screw the magnetic mounting arm onto the shower pipe. Tighten by hand first, then use a tool for a final quarter-turn if necessary.
04
Connect the Hose
Attach one end of the flexible hose to the mount and the other to the Spot shower head. Ensure the rubber washers are in place at both ends.
05
Dock and Secure
Place the shower head into the magnetic dock. Install the secondary suction dock at your preferred height for ultimate placement control.
Visual Installation Guide
Follow this step-by-step video demonstration for a seamless installation. We recommend watching the full video once before beginning the process.
Low water pressure after installation?
Check for debris in the screen washer at the inlet. Ensure your FreedomFlow™ valve is fully open.
Water is leaking from the connection?
Double-check that the washer is inserted and the threading is tight. Use plumber's tape if necessary.
Troubleshooting & FAQ
What if the Magnetic Mount won't hold?
Ensure the surface is clean and dry before applying suction. Magnetic contact works best when the handle is seated correctly.
How often to clean the HydroBrush™?
We recommend a quick rinse after each use. For deep cleaning, soft silicone bristles are dishwasher safe.
Still Stuck? We're Here to Help.
If you're having trouble with your Spot shower head installation, our technical support team is ready to assist you. Send us a message and we'll get back to you within 24 hours.